GE LOGIQ 500 Advanced Reference Manual page 410

VCR Operating Instructions
Advanced Search
Image search
.
.
8–34
Activating Image Search
Pressing Ctrl and I with Ext Video On enables an image search
based on patient information and the scan date.
The search conditions can be entered by typing in a patient
name, patient ID, scan date, or all three.
(An attempt to make a search with no information specified for the
search conditions, causes all the patient information on the tape
to appear in a list of the relevant patients.)
NOTE: Image search requires the optional Heading VCR
Playback function.
The image search function cannot be activated in the scan
image mode.
Entering the search conditions
Use the Trackball or press Return to move the cursor to either
the PT NAME, PT ID or DATE field, depending on the type of
search being done.
For a search based on a patient name, enter the patient name
using the cursor in the PT NAME field of the image search
menu.
For a search based on a patient ID, enter the patient ID with
the cursor in the PT ID field of the image search menu.
For a search based on a scan date, enter a scan date with the
cursor in the DATE field of the image search menu.
Pressing Return when the cursor is to the right of the
appropriate field begins a search.
NOTE: A search based on a combination of patient name,
patient ID, and scan date is also possible.
LOGIQ 500 Advanced Reference Manual
2276614–100 Rev. 0