GE LOGIQ 500 Advanced Reference Manual page 45

Standard Procedure (cont'd)
Hints
.
LOGIQ 500 Advanced Reference Manual
2276614–100 Rev. 0
S
To zoom the 3D-Surface image, press ZOOM SURFACE.
S
To return to the Cine image, select DISPLAY SURFACE.
The 3D-Surface image disappears.
S
When the "Not Enough Memory" message is displayed on
the bottom of the screen, change the size of ROI to small
until this message disappears and then press SET.
S
To exit 3D-Surface Mode, select 3D SURFACE.
Measurements will be available.
In 3D Mode, the 3D Surface image is not active.
3D-Surface image is not available based on a MIP (3DvieW)
image.
3D–Surface Mode
3–15