Image Transfer - GE LOGIQ 500 Advanced Reference Manual

Storage/Print Option

Image Transfer

CAUTION
9–10
If special characters are entered in the New Patient Menu
(using Blue Shift or Red Shift keys), the image will not transfer
to the DICOM device.
The Service and Device Name of each DICOM Server (1–7)
that is registered in the Network Configuration Menu will appear
on the VFD display when the DICOM Top Menu is selected.
Archive
DICOM–S
StoreUS
DICOM–P
Device's first
7 characters
DICOM Service
7 characters
Figure 9–8. DICOM Top Menu
To transfer the image displayed on the screen, press either the
top or bottom of the appropriate rocker switch under the DICOM
server selections.
During the transfer process, the image is first stored to the hard
disk drive (HDD) as a temporary file. Until this operation is
complete, keyboard operation is prohibited.
A message is displayed at the bottom of the screen (in the case
of 3x5 format in the Printer Setup Menu):
"Print Queued Image Number: 1/15"
After the temporary fifteen are stored on the HDD, DICOM
transfer is executed as a background process when all images
are collected for that job.
DICOM AutoSeq
DICOM–A
StoreSC
Print
Page 1 of 2
LOGIQ 500 Advanced Reference Manual
Cine
Force
Print
2276614–100 Rev. 0