GE LOGIQ 500 Advanced Reference Manual page 439

Image Transfer Status (cont'd)
Manual Retry
Force Print
Power Down
LOGIQ 500 Advanced Reference Manual
2276614–100 Rev. 0
If all automatic retries have failed to transfer the image, the
image file can be selected manually by:
S
Trackball to the file desired and press Set.
S
Trackball to the command [RETRY] and press Set.
S
The DICOM image transfer attempt will be made again.
The temporary image file remains on the HDD until image
transfer is successful or it is manually deleted using the delete
command in the Image Transferring Queue Status Menu.
If a job has failed or a print device is inoperative, the user can:
S
Trackball to the job and press Set.
S
Use the Ellipse rocker switch to change the destination
device. At that time, select the same type (color or b/w)
device as the previous selection.
S
Trackball to retry and press Set.
The job will be sent to the newly selected device.
Force Print can be used to execute the print function
immediately. For example, if the page setup is 3x3 and only 6
images have been printed, Force Print can be used to print the
page with only 6 images instead of 9.
To utilize Force Print, select Force Print from the DICOM
Sub-Menu page 1. The appropriate printer must then be
selected from the same Sub-Menu page in order for the images
to be printed.
When the system power is turned off, the image transfer that is
in progress will be completed before shut down. The following
message is displayed.
"Execute all dicom jobs before shut down. Y/N?"
If yes, all queues that have a "wait" status will be executed
before shut down. If no or a time out occurs, the system shuts
down immediately. The status of all queues will be changed to
"fail" and remain on the Queue Menu.
Storage/Print Option
9–13