GE LOGIQ 500 Advanced Reference Manual page 435

Host Verification (cont'd)
Ping
Menu Navigation
LOGIQ 500 Advanced Reference Manual
2276614–100 Rev. 0
When the result is successful, it shows that DICOM
communication is available between the LOGIQ
server. If the verify failed, the LOGIQ
communicate with the remote server.
Failure could be due to many reasons. First, check that the
Network Configuration Menu parameters are correct. Second,
check with the Network System Administrator on the status of
other network devices.
Ping can be used to verify an IP Address on the network. Enter
the desired IP Address and set Verify to 'y' (yes). Trackball to
the [EXECUTE] command and press Set.
The result, sending/receiving packet number and average
speed of sending/receiving packet success, will be displayed.
S
Netconf Menu: Display the Network Configuration Menu.
S
Queue Menu: Display the Image Transfer Queue Status
Menu.
S
Exit: Exit the Network Utility Menu.
Storage/Print Option
500 and host
500 cannot
9–9