Advanced Cardiac Calculations Measurement Menus - GE LOGIQ 500 Advanced Reference Manual

Continuous M-Mode Measurements (cont'd)
Hints

Advanced Cardiac Calculations Measurement Menus

LOGIQ 500 Advanced Reference Manual
2276614–100 Rev. 0
The Ellipse rocker switch is used to skip measurements or
move back to measurements that were skipped.
Before the end point is set, uncompleted measurements can be
removed by pressing Clear once. That measurement can then
be started again.
Measurements can be taken in Zoom mode as long as the
magnification is not changed during the measurement process.
Measurements can be programmed not to appear in the
continuous measurement sequence in the Set Up/Preset
Program menu pages 5 and 6.
If the measurement is set to OFF in the Preset Program menus,
it will not appear in the continuous sequence. Additional Set
points will have to be made if measurements are skipped in the
continuous sequence.
The illustrations that follow show the Advanced Cardiac
Calculation measurement Sub-Menus that are available with
the AMCAL option.
Each selection in the first layer of Sub-Menus will yield a
second layer of Sub-Menus. This second layer contains
measurements and calculations necessary to complete the
category or goal selected in the first layer.
The illustrations shown are those that result if the determination
of systole/diastole is set to Automatic and then Manual.
Advanced Cardiac Calculations
4–43