Change The Number Of Fetuses - GE LOGIQ 500 Advanced Reference Manual

OB–Multigestational

Change the Number of Fetuses

Number Increase
Number Decrease
4–24
In the ID/Name function, the user can increase or decrease the
fetus number or cancel the Multigestational function. This
would need to be accomplished due to the demise of a fetus or
error in the definition of the fetus number.
If the fetus number has been increased on the Patient Entry
Menu, the message:
"Are you sure to change the number? (y/n)"
is displayed.
'y' will create the report pages for the new fetus.
'n' returns to the previous number.
If a fetus number increase is not available, the message: "Data
range over. Input proper data." is displayed.
If the fetus number has been decreased on the Patient Entry
Menu, the message:
"Are you sure to change the number? (y/n)"
is displayed.
'y' prompts the user to select which fetus to delete (A, B, C or
D).
'n' returns to the previous number.
The data of deleted fetuses is deleted for the measurement
result window and report pages. If the fetus number is reduced
to one, the multigestation function is cancelled.
After the decrease in fetus number, there is no need to adjust
the IDs (A, B, C or D) of the remaining fetuses. The same ID
for the remaining fetuses can be maintained and used.
LOGIQ 500 Advanced Reference Manual
2276614–100 Rev. 0