Cfm Map; Activating 3D-Mode - GE LOGIQ 500 Advanced Reference Manual

3DvieW Mode

CFM Map

Activating 3D-Mode

.
.
3–4
CFM Map choices (1–6) used in 3D Mode are selected in the
Set Up/Custom Display page 15.
The symmetrical maps A1 thru A4 for the Advanced velocity
mode (option) are available for 3D Mode.
NOTE: The 3D Option presets are located on Set Up/Custom
Display pages 9 and 18.
3D-Mode must be activated prior to collecting the desired scan
data. To activate 3D-Mode:
2. While in normal B-Mode, display Sub-Menu page 2.
Press the Sub-Menu Select rocker switch, if
necessary, to display page 2.
3. Select 3D Mode so that the menu item is highlighted.
The message 3DvieW is displayed in the lower left
portion of the screen.
4. Scan as desired in B- or CFM-Mode.
NOTE: If 3D-Mode is enabled with the image left/right
orientation reversed, the system will not automatically switch to
normal orientation. The image stays in the reverse presentation
because the reverse function is not available.
LOGIQ 500 Advanced Reference Manual
2276614–100 Rev. 0