GE LOGIQ 500 Advanced Reference Manual page 400

VCR Operating Instructions
Control Panel (cont'd)
8–24
Rev (Reverse/reverse search)
Pressing the Rev key while the VCR is stopped or fast
forwarding will begin reverse.
Tape reverse is also possible in the scan image mode.
To stop reverse, press Stop/Play.
Pressing Rev while the VCR is playing, fast-forward searching
or paused will activate a reverse search.
To cancel the reverse search and return to normal playback,
press Rev again.
Frame Shift (frame forward/frame reverse)
Pressing a Frame Shift key once when VCR playback is
paused or fast-forward search/reverse search is paused will
begin frame forward/frame reverse.
Holding down Frame Shift while VCR playback is paused or
fast-forward search/reverse search is paused changes the
playback speed of fast-forward search/reverse search.
Releasing the Frame Shift will return the image to the pause
status.
Record End Function (Rec-End)
With the heading function turned ON (service software), the
Rec-End function moves the tape to the position at the end of
the last recording.
If the heading function is turned OFF, recording can be started
at any position on the tape.
LOGIQ 500 Advanced Reference Manual
2276614–100 Rev. 0