GE LOGIQ 500 Advanced Reference Manual page 58

Fetal Trend Management
Save Function Messages
.
4–12
If patient information has not been entered, the message
displayed is:
"Input patient's information:"
If a patient ID number is not entered, the message displayed is:
NOTE: The ID number is necessary or the SAVE function
CANNOT be accomplished. It is possible to save data without
a patient name or EDC but the information displayed with the
LIST–DATA function is limited.
If all of the data is the same as a file on the data list, the
message displayed is:
"Overwrite existing data? 'y' 'n'. "
where 'y' replaces the archived file with the new file.
'n' causes the system to do nothing. This cancels the SAVE
function request.
If the storage media is full, especially in the case of the limited
capacity of the hard drive, the message displayed is:
"Data is full. Delete needless data."
Eliminating needless data will help to conserve storage space.
"Input ID:"
LOGIQ 500 Advanced Reference Manual
2276614–100 Rev. 0