GE LOGIQ 500 Advanced Reference Manual page 417

Tape Search (cont'd)
Hints
LOGIQ 500 Advanced Reference Manual
2276614–100 Rev. 0
Displaying the search results
When the search is completed, the system displays the
message
as well as the system ID and tape ID of the relevant tape.
[ TAPE SEARCH MENU
PT NAME :
PT ID :
DATE (MM / DD / YY) :
SYSTEM ID TAPE ID
XXXXX XXXX
Ctrl + Q : Quit
Operator Message Area
Figure 8–11. Definite Tape ID
S
In a search using a patient name, upper-case and
lower-case letters are not differentiated.
S
The system lists all search candidates whose names
include the entered word.
Example: Entering Yama as the patient name to conduct a
search displays all names containing those letters such as
YAMADA, yamamonto, and Nakayama as candidates in the
list.
S
To exit the search menu in mid-course, press Ctrl and C to
cancel the search function.
S
Pressing Ctrl and Q returns to the previous entry screen.
If a mistake is made in data entry, press Back Space the
required number of times to erase any wrong characters,
then re-enter the correct characters.
VCR Operating Instructions
"Search was completed."
]
12345678901234567890123456789
12345678901234
12 / 31 / 93
Ctrl + C : Cancel
8–41