GE LOGIQ 500 Advanced Reference Manual page 166

Urology Calculations (Option)
Mechanical Stepper/Needle Placement Guide Option
CAUTION
4–120
This mechanical stepping device is intended to be used with the
LOGIQ 500 and the 7MHz Transaxial (ERB7) Probe.
The variable position mechanical stepping device is used to
hold the 7MHz Transaxial (ERB7) Probe, lock the probe in
place and move the probe in small increments throughout an
organ in cross-sectional slice. Used with the LOGIQ
Stepper Volume Calculation, a complete three–dimensional
volume calculation can be made of an organ.
The needle placement guide template matches the
LOGIQ 500 electronic needle placement grid for the 7MHz
Transaxial (ERB7) Probe to aid in needle placement.
The universal table mounting system holds the stepper and is
compatible with most radiology and urologic tables.
Standard stepper increment is 5.0mm. Assembly for 2.5mm
increment movement is available. Therefore it is necessary to
match the stepper movement to the ultrasound system
software.
Refer to the Stepping Device Instructions for details.
LOGIQ 500 Advanced Reference Manual
2276614–100 Rev. 0
500