GE LOGIQ 500 Advanced Reference Manual page 50

Realtime Doppler Calculations
Soft Menu Changes (cont'd)
Transf CALCS is only available with Realtime Doppler Calculation option installed
Figure 4–2. General Calculations Sub-Menu Page 2
.
4–4
Example: "Mean" is the Trace Method selection.
S
Enable Trace Auto and perform Doppler scan.
S
TAMEAN and TAMAX (peak) are traced automatically.
S
Freeze the image and select "Transf. CALCs".
S
Values are transferred to measurement area.
S
Select PI and TAMAX value is used in calculations.
S
Select other measurements like FV and TAMEAN is used in
the calculations.
Each measurement menu in all exam categories (except GYN
and Cardiology with AMCAL option) has a selection for:
S/D A/B
Ratio Ratio
PI RI
S
Trace Auto
S
Transf. Calcs:
NOTE: Only OB or Vascular PI, RI and S/D (D/S) ratio are
transferred to the OB, Vascular or Carotid report pages.
HEART TRACE
RATE AUTO
Transf
CALCS
Turn Auto Trace on/off
Transfers automatic calculations
currently displayed to the
Measurement results area.
LOGIQ 500 Advanced Reference Manual
2276614–100 Rev. 0