GE LOGIQ 500 Advanced Reference Manual page 57

Type of Data Saved
Save Command
.
.
LOGIQ 500 Advanced Reference Manual
2276614–100 Rev. 0
The type of data that is recorded during the SAVE function is:
1. Date and Time
2. Patient Name and ID
3. Calculated EDC or EDD
4. Measurement Author's Name
5. Measured or Calculated Data
NOTE: To avoid any trouble in searching later, it is better to
have all patient information entered before saving.
Use the Trackball to highlight the SAVE command and press
Set.
If patient information has been entered, the patient data,
measurements and calculations will be saved to the designated
media (HD or MOD).
If there are similar files in the data list (i.e. same ID but Name
and EDC are different), the system displays the Patient List
Menu (LIST-ID). The user will have to select the file to which
the data will be added.
If the user does not input the ID, the system displays the
List-Data Menu. The user will then have to input the ID.
If the user does not input other patient data, the system
displays the List-Data menu. The user will then have to input
the patient data.
If more than one candidate is available on the list, the system
first displays the Patient List Menu. The user then has to pick
the proper file in which the current data will be added.
NOTE: If measurement averaging is turned on, only the
average value is saved. If measurement averaging is turned
off, only the last measured or calculated value is saved.
Fetal Trend Management
4–11