GE LOGIQ 500 Advanced Reference Manual page 36

3DvieW Mode
Activating 3D-Mode (cont'd)
CAUTION
.
CAUTION
Cine Top Menu
3–6
When acquiring the image data, pull the probe from Start to
Finish. DO NOT PUSH THE PROBE.
Pushing the probe may cause the rendered image to appear
confusing or improper.
NOTE: 3D images cannot be rendered in PDI-Mode.
3D Mode select can also be found in the CFM, PDI and Cine
Sub-Menus.
When 3D-Mode is activated, Image memory will be cleared and
the message displayed is:
"Are you sure to erase all the image memory data? (y/n)"
When 3D-Mode is activated, one half of cine memory is
allocated for use by 3D-Mode.
Page 1 of 3
DICOM
Archive Auto Seq
Start Review
Frame Loop
End Multpl
Frame CINE
Page 2 of 3
Archive DICOM Auto Seq
CINE Swing
Capture Speed
Capture
Frame
1/2
Page 3 of 3
Archive DICOM Auto Seq
Start Render
Frame 3D
End Review
Frame 3D
Figure 3–2. Cine Sub-Menus
CINE
Loop Side
Speed Change
Cine
Gauge
1/1
CINE
Aspect
Ratio
3D
Mode
1/3
CINE
Project View
Tech. Directn
Min Normal
LOGIQ 500 Advanced Reference Manual
2276614–100 Rev. 0