List Id Management - GE LOGIQ 500 Advanced Reference Manual

Fetal Trend Management

List ID Management

List ID Commands
4–14
The system allows the user to manage the data that was
previously stored using the Patient ID List.
Choose LIST–ID from the OB Graph display. The system
displays all data found on the storage media. The newest data
will have the first order number. The oldest data is displayed on
the last page as shown in Figure 4–5.
Figure 4–5. LIST–ID Data Display
The commands at the bottom of the List–ID page allow the user
to perform the following functions:
CTRL, N—Displays the next page
CTRL, P—Displays the previous page
CTRL, A—Allows user to rearrange the order of the display list
CTRL, L—Displays the selected patients data list
CTRL, D—Deletes saved patient data
CTRL, S—Searches the ID List for desired patient information
CTRL, M—Allows user to modify patient data of a selected file
CTRL, K—Saves the current patient data
CTRL, C—Cancels the current process
CLEAR—Clears entered characters
LOGIQ 500 Advanced Reference Manual
2276614–100 Rev. 0