GE LOGIQ 500 Advanced Reference Manual page 148

Advanced Cardiac Calculations
Operation and Messages (cont'd)
4–102
SAVE
The SAVE command will save the changes as the new report
printing configuration. Prior to saving, the following message is
displayed:
"Overwrite? Press 'ESC' to cancel. 'SET' to confirm"
Set saves the order changes. Esc causes nothing to happen.
If the Order process was not completed, the following message
is displayed:
"Complete the present set up first."
EXIT
If the exit command is selected before choosing, completing or
saving a new sequence program, the following message is
displayed:
"Quit? Press 'ESC' to cancel. 'SET' to confirm"
Set exits from this screen. Esc causes nothing to happen.
If a new sequence program was completed but not saved, the
following message is displayed:
"Overwrite? Press 'ESC' to cancel. 'SET' to confirm"
Set saves the order changes and exits. Esc causes nothing to
happen.
LOGIQ 500 Advanced Reference Manual
2276614–100 Rev. 0