GE LOGIQ 500 Advanced Reference Manual page 389

Setting up the LOGIQ
.
Figure 8–6. Set Up/System Parameters Menu Page 5
LOGIQ 500 Advanced Reference Manual
2276614–100 Rev. 0
500
After the VCR is connected to the LOGIQ
LOGIQ 500 must also be set up.
Select the top menu Set Up from the software menu and select
System Parameters.
On page 5 of the System Parameters menu, set Port A or Port
B to VCR.
Then select SAVE to exit the menu.
NOTE: After changing the setting, turn OFF the system power
switch, then restart the system.
For reference, see Chapter 14 (Customizing Your System) in
the Basic User Manual.
VCR Operating Instructions
500, the
8–13