GE LOGIQ 500 Advanced Reference Manual page 56

Fetal Trend Management
Saving Data
4–10
Before the diagnosis is complete, ensure that all patient
information such as Name, ID, Ref MD and EDC has been
entered. If it has not, use the ID/Name key to enter this
necessary information. Select the OB Graph function from the
OB Calculation soft menu.
Five additional commands are displayed on the OB Graph that
relate to the Fetal Trend Management option as shown in
Figure 4–3. These commands are:
LIST–ID—Displays a list by patient ID number.
LIST DATA—Displays data for a specified patient.
TREND–BOTH—Shows data points on the OB graph based on
current and past data.
TREND–PRESENT—Shows data points on the OB graph
based on current data only.
SAVE—Saves Patient information to specified media.
CHANGE GRAPH—Changes the measurement value graphed
(performs the same function as in the basic OB calculation
package).
Figure 4–3. OB Graph Display
LOGIQ 500 Advanced Reference Manual
2276614–100 Rev. 0