Map Curve Selection - GE LOGIQ A100 Technical Publication

Configuration Using Control Keys

Map Curve Selection

The system has ten types of curves (in two groups A and
B) that translate an image from system memory into a
gray scale display. The CONTROL Y function selects the
gray level mapping curve for a Diagnostic Category or
the Category under study.
The OB Diagnostic Category uses package B. All the
other Diagnostic Categories use package A. To assign a
map curve to an image (frozen or real time):
Press CONTROL
Ctrl
Enter
Press Y for the Map Curve Selection
Y
Press 1 for Mapping Level 1
1
Press 2 for Mapping Level 2
2
Press 3 for Mapping Level 3
3
Press 4 for Mapping Level 4
4
Press 5 for Mapping Level 5
5
Press ENTER. Any one of the 5 Map Curve Selections
Ctrl
chosen is active for the category under study.
Enter
254
t
α 100 User Manual
LOGIQ
2211157–100 Rev 0