Master Alarm Power-Up - BeaconMedaes MedPlus TotalAlert Operation And Maintenance

Master Alarm Power-Up

Chapter 1: Introduction

Master Alarm Power-Up

Tools required:
1. Using a 5/32" hex wrench, unlock the front panel (DE) (see figure 1-17 on
page 1–60).
2. Turn the power switch (DC) to the ON position.
The Master Alarm displays the following in two second intervals:
Booting
BeaconMedæs
TotalAlert System
Version: #.##
SN: #####
Browse at
Master#####
Page 1-60
5/32" hex wrench
Figure 1-17. Master Alarm
http://
MedPlus TotalAlert® Alarm Network Operation and Maintenance Manual (205728)