Browse Active Medplus Totalalert® Alarm Network Inputs - BeaconMedaes MedPlus TotalAlert Operation And Maintenance

Configuring and Browsing the Master Alarm Using the Web Pages
Chapter 1: Introduction
Browse Active MedPlus TotalAlert® Alarm Network Inputs
1. To browse the current alarms, click on the Alarms link. The Current Alarms
page displays (see figure 1-46 on page 1–98).
NOTE:
When the Network Communications Board is installed in the Area Alarm, you
can monitor all of the inputs on the MedPlus TotalAlert® Alarm Network.
Otherwise, only the Master Alarms' inputs are shown.
2. Click on the Refresh link to view the most recent information.
Page 1-98
Figure 1-46. Current Alarms
MedPlus TotalAlert® Alarm Network Operation and Maintenance Manual (205728)