Test; Calibration - BeaconMedaes MedPlus TotalAlert Operation And Maintenance

Test

For detailed testing requirements, refer to the latest edition of the NFPA 99 stan-
dard or CSA Z305.1-92 code.
Permanent records of all test results for alarm systems should be made at the
time of installation and at all required intervals as specified by the NFPA 99 stan-
dard.

Calibration

All calibration is performed at the factory. If a unit fails or gives erratic readings,
contact BeaconMedæs Technical Support at 1-888-4MEDGAS (1-888-463-3427).
MedPlus TotalAlert® Alarm Network Operation and Maintenance Manual (205728)
General Information
Chapter 6: General Procedures
Page 6-27
6