Alarm Panels - BeaconMedaes Medipoint 125 Operation And Maintenance Instructions

Medical Gas Central Alarm - Medipoint 125 Digital Alarm
1.3

Alarm Panels

Each alarm panel consists of a first and second fix
assembly, and are suitable for use with either surface
or concealed installations. A bezel plate is provided for
use with concealed installations and is fitted to the first
fix assembly to give a neat appearance by covering the
plaster joint. The front cover of the enclosure is hinged
and retained by a security fastener, which prevents
unauthorised access (see figure 4).
The assembly contains two printed circuit boards and
provides a gas service display from the LCD touch
screen. Each gas service is displayed in the NORMAL
(green, steady) and up to four fault conditions (yellow or
red, flashing) alarm conditions to show the gas service
status. All alarm conditions are illuminated by a flashing
display and accompanied by an audible warning. Each
alarm panel locates all electrical components on either
the power supply or processor printed circuit boards,
which are interconnected by a ribbon cable.
Overall dimensions are detailed at Table 1 & Figure 3.
TABLE 1: Medipoint 125 – DIMENSIONS
Height (mm)
Length (mm)
Depth (mm)
Chase depth (mm)
Figure 5 - Medipoint 125 dimension drawing
C
VIEW C
4233500107.03
Alarm Panel Bezel
150.0 200.0
260.0 310.0
61.8 1.2
45.0 -
B
A
150
Figure 4 -Medipoint 125 assembly
2
Medipoint 125 consists of: -
No. Description
1 2nd fix alarm Panel.
2 1st fix backbox.
3 Flush mounted bezel.
4 Security access fastener.
30
50
8
3
1
VIEW B
200
2 x 20 CABLE GLAND KNOCKOUTS
VIEW A
2 x 20 CABLE GLAND KNOCKOUTS
40 40 40 40
260
4
30
50