Wiring Diagrams - BeaconMedaes MedPlus TotalAlert Operation And Maintenance

Wiring Diagrams

Chapter 3: Theory of Operation

Wiring Diagrams

Figure 3-5. Typical Local Alarm
Refer to fold-out FO 3-1 at the rear of this manual.
Figure 3-6. Typical Master Alarm
Refer to fold-out FO 3-2 at the rear of this manual.
Figure 3-7. Typical Master Alarm to Master Alarm
Refer to fold-out FO 3-3 at the rear of this manual.
Figure 3-8. Typical Area Alarm 3
Refer to fold-out FO 3-4 at the rear of this manual.
Figure 3-9. Typical Master Alarm to Area Alarm
Refer to fold-out FO 3-5 at the rear of this manual.
Figure 3-10. Typical Master Alarm with Six Area Alarm Combination
Refer to fold-out FO 3-6 at the rear of this manual.
A Master Alarm with three Area Alarm Modules is also available. It is similar to
the wiring diagram of the Master Alarm with six Area Alarm Modules; however,
it does not have an RS-485 connection to interface with a building automation
system.
MedPlus TotalAlert® Alarm Network Operation and Maintenance Manual (205728) Page 3-15