Configuring Options Available For The Area Alarm - BeaconMedaes MedPlus TotalAlert Operation And Maintenance

Configuring Options Available for the Area Alarm

By using the front panel keys, you can configure or view the following options
(refer to table 1-5 on page 1-33 and table 1-6 on page 1-33).
Table 1-5. Configuring Options Available for the Area Alarm by Using the
Option
A hi
A lo
A rt
d ir
FLor
ArEA
2onE
Table 1-6. Viewing Options Available for the Area Alarm by Using the Front
Option
dFLt
9ASt
ScAL
trEu
ArEu
MedPlus TotalAlert® Alarm Network Operation and Maintenance Manual (205728)
Detailed Component Descriptions
Front Panel
Description
Alarm high setpoint
Alarm low setpoint
Alarm repeat time
Alarm wing direction
Alarm floor level
Alarm area
Alarm zone
Panel
Description
Sets alarm to default values
Gas type
Measuring scale
Transducer firmware revision
Area Alarm Module firmware revision
Chapter 1: Introduction
Page 1-33
1