Local Alarm Front Panel; Removal - BeaconMedaes MedPlus TotalAlert Operation And Maintenance

Local Alarm Front Panel

Chapter 4: Removal, Replacement, and Adjustment Procedures

4.11 Local Alarm Front Panel

Tools required:

Removal

1. Using a phillips head screwdriver, loosen the four screws (A) enough to
allow the front panel (B) to slide off (see figure 4-12 on page 4–32).
2. Slide the front panel (B) up and off of the back box (E).
Turn off the power supply in the alarm, and leave it off during the installa-
tion or replacement of any component or sub-assembly. Failure to do so
could result in personal injury or equipment damage.
3. Turn the power switch (F) to the OFF position.
4. Unplug the buzzer wiring (D).
5. Unplug the power supply wiring (C).
Page 4-32
Phillips head screwdriver
Figure 4-12. Local Alarm Front Panel
Shock Hazard:
MedPlus TotalAlert® Alarm Network Operation and Maintenance Manual (205728)