Features
Master Alarm
The Master Alarm consists of a rough-in assembly (AC) and a front panel (AB)
(see figure 1-3 on page 1–11).
NOTE:
The Master Alarm conversion kit rough-in components are shipped as sub-assem-
blies and installed in an existing rough-in box.
The features of the front panel on the Master Alarm are as follows:
•
•
•
MedPlus TotalAlert® Alarm Network Operation and Maintenance Manual (205728)
Figure 1-3. Master Alarm
Display (AU)—Displays alarm status.
LED indicators (AV)—Light either green or red depending on the
alarm status.
Label (AW)—Shows which type of gas being indicated by the LED.
Features
Chapter 1: Introduction
Page 1-11
1