Tool and Supply Requirements
To service the MedPlus TotalAlert® Alarm Network, the following tools and sup-
plies are required:
• 5/32" hex head wrench
• Small slotted screwdriver
• Phillips head screwdriver, various sizes
• Needle nose pliers
• Wire strippers
• Wire crimpers
• 5/16" nut driver
• Adjustable wrench
• Screwdriver
• 11/16" wrench
• Leak detection solution
• Teflon® tape
MedPlus TotalAlert® Alarm Network Operation and Maintenance Manual (205728)
Tool and Supply Requirements
Chapter 6: General Procedures
Page 6-33
6