Local Alarm Setup Procedures
Setting up the Local Alarm involves the following procedures:
• Labeling (see "Local Alarm Labeling" on page 1–129)
• Powering on (see "Local Alarm Power-Up" on page 1–132)
Local Alarm Labeling
Tools required:
1. If the labeling for the Local Alarm was not completed during the installation,
complete it now.
2. To aid in the labeling process, you may want to complete the following table.
Input Number
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
MedPlus TotalAlert® Alarm Network Operation and Maintenance Manual (205728)
Phillips head screwdriver
Labels (provided)
Table 1-32. Local Alarm Input Signal Data
Input Source
Local Alarm Setup Procedures
Chapter 1: Introduction
Alarm Message
Page 1-129
1