FENDER PANEL
EXTERIOR BODY PANELS
3. Fender Panel
A: REMOVAL
1) Disconnect ground (−) cable from battery.
2) Remove side sill spoilers. <Ref. to EI-19, Side
Sill Spoiler.> (If fitted)
3) Remove front bumper face. <Ref. to EI-8, RE-
MOVAL, Front Bumper.>
4) Remove mud guard. <Ref. to EI-16, REMOVAL,
Mud Guard.>
5) Loosen bolts to remove front fender.
BO0153
B: INSTALLATION
1) Install in the reverse order of removal.
2) When fender panel is installed, clearance be-
tween fender panel and hood or front fender must
be equal.
EB-10