Suzuki GA413 Service Manual page 151

3D-6 FRONT SUSPENSION
WHEEL DISC, NUT & BEARING CHECK
1) Inspect each wheel disc for dents, distortion and cracks. A disc
in badly damaged condition must be replaced.
2) Check wheel nuts for tightness and, as necessary retighten
them to specification.
Tightening Torque
(a): 85 N·m (8.5 kg-m, 61.5 lb-ft)
3) Check wheel bearing for wear. When measuring thrust play, ap-
ply a dial gauge to wheel hub center after removing wheel cen-
ter cap from wheel disc.
Thrust play limit "a": 0.1 mm (0.004 in.)
When measurement exceeds the limit, replace wheel hub as-
sembly.
4) By rotating wheel actually, check wheel bearing for noise and
smooth rotation. If defective, replace wheel hub assembly.