Suzuki GA413 Service Manual page 91

1. Rack damper screw
2. Rack plunger spring
3. Rack plunger
4. Rack plunger lock nut
4) Remove boot from tie-rod.
5) Unbend bent part of tie-rod lock washer and remove tie-rod
1. Lock washer
2. Tie-rod
3. Steering rack
6) Remove parts as shown.
7) Remove steering gear case cover.
8) Remove pinion bearing plug with special tool.
9) Tap on position as shown with plastic hammer to separate pin-
10) Remove pinion assembly.
1. Pinion assembly
2. Plastic hammer
from rack.
Special Tool (43 mm socket)
(A): 09944-26011
ion assembly from housing.
MANUAL RACK AND PINION 3B-5