LAPIS Semiconductor ML62Q1000 Series User Manual page 770

3 S51MD
2 S50MD
1 S49MD
0 S48MD
[Note]
Write the segment mode register in the display stop mode (LMD1 bit and LMD0 bit of DSPCON
register is "0") to prevent erroneous displays or damage of panel.
FEUL62Q1000
This bit is used to select the general-purpose input/output and segment output functions.
0: P32 (Initial value)
1: SEG51
This bit is used to select the general-purpose input/output and segment output functions.
0: P31 (Initial value)
1: SEG50
This bit is used to select the general-purpose input/output and segment output functions.
0: P30 (Initial value)
1: SEG49
This bit is used to select the general-purpose input/output and segment output functions.
0: P41 (Initial value)
1: SEG48
ML62Q1000 Series User's Manual
Chapter 27 LCD Driver
27-20