LAPIS Semiconductor ML62Q1000 Series User Manual page 311

8.3.1.2 One-shot Mode
Figure 8-4 shows the one-shot mode operation in the 16-bit timer mode.
TMHnＣ register
value
TMHnD
register
value
TMHnSTAT
TMHn Interrupt
TMHnOUT
In the one-shot mode, when the timer count value matches with the TMHnD register, 16-bit timer n interrupt (TMnINT)
is generated and the value of the port is reversed. Then, the timer count value is reset to "0x0000" and the counting is
stopped.
The TMnINT generation cycle and the port output reverse cycle are the same as those in the repeat mode. The same
applies to the timer start/stop timing and counting up timing.
FEUL62Q1000
ＨｉＺ
Initial value
Enable Port
Start
Output
timer
Figure 8-4 One-shot Mode Operation Timing in 16-Bit Timer Mode
Ｔ
TMI
Initial value
The count
value
matches
ML62Q1000 Series User's Manual
Chapter 8 16-Bit Timer
8-20