3
S35MD
2
S34MD
1
S33MD
0
S32MD
[Note]
Write the segment mode register in the display stop mode (LMD1 bit and LMD0 bit of DSPCON
register is "0") to prevent erroneous displays or damage of panel.
FEUL62Q1000
This bit is used to select the general-purpose input/output and segment output functions.
0: P57 (Initial value)
1: SEG35
This bit is used to select the general-purpose input/output and segment output functions.
0: P56 (Initial value)
1: SEG34
This bit is used to select the general-purpose input/output and segment output functions.
0: P27 (Initial value)
1: SEG33
This bit is used to select the general-purpose input/output and segment output functions.
0: P26 (Initial value)
1: SEG32
ML62Q1000 Series User's Manual
Chapter 27 LCD Driver
27-18