LAPIS Semiconductor ML62Q1000 Series User Manual page 348

Bit symbol
Bit no.
name
2 FTnIEB
1 FTnIEA
0 FTnIEP
FEUL62Q1000
This bit is used to enable the event timing B interrupt (in TIMER and PWM1 mode) or the
capture B interrupt (in CAPTURE mode).
Ÿ TIMER, PWM1 mode
0: Event timing B interrupt is disabled (initial value)
1: Event timing B interrupt is enabled
Ÿ PWM2 mode
0: Write always "0"
1: Do not set
Ÿ CAPTURE mode
0: Capture B interrupt is disabled
1: Capture B interrupt is enabled
This bit is used to enable the event timing A interrupt (in TIMER, PWM1 and PWM2 mode) or
the capture A interrupt (in CAPTURE mode).
Ÿ TIMER, PWM1, PWM2 mode
0: Event timing A interrupt is disabled (initial value)
1: Event timing A interrupt is enabled
Ÿ CAPTURE mode
0: Capture A interrupt is disabled
1: Capture A interrupt is enabled
This bit is used to enable the cyclic interrupt.
0: Cyclic interrupt is disabled (Initial value)
1: Cyclic interrupt is enabled
ML62Q1000 Series User's Manual
Chapter 9 Functional Timer (FTM)
Description
9-28