Installing Field Wheels - MacDon R116 Unloading And Assembly Instructions

5.4 Installing Field Wheels

1. Remove shipping strap (B) from wheel spindle (A).
Repeat on opposite side.
2. Remove wheel bolts (A) from spindle (B).
CAUTION
When installing wheel, be sure to match countersunk
holes with bolt head profiles. Holes that are not
countersunk do NOT correctly seat the bolts.
3. Position wheel (A) on the spindle, install bolts (B), and
partially tighten.
IMPORTANT:
Be sure valve stem (C) points away from the
wheel support.
214713
SETTING UP THE TRACTOR
Figure 5.17: Wheel Spindle
Figure 5.18: Wheel Spindle
Figure 5.19: Installing Wheel Bolts
100
B
B
C
A
A
A
B
Revision A