Removing Disc Mower From Shipping Pallet (Transport Installed) - MacDon R116 Unloading And Assembly Instructions

5.10 Removing Disc Mower from Shipping Pallet (Transport
Installed)
1. Cut strapping (B) securing cutterbar to pallet (A).
IMPORTANT:
To prevent the mower from dropping, ensure float
springs were retensioned after repositioning the
center-link top anchor. Refer to
Center-Link Top Anchor, page
2. Use the transport wheels to lift the disc mower high
enough that the pallet can be removed.
3. Use a chain or forklift to remove shipping pallet (A) from
underneath the disc mower.
4. Lower mower to the ground.
214713
SETTING UP THE TRACTOR
4.1 Repositioning
57.
117
Figure 5.58: Strapping
Figure 5.59: Removing Shipping Pallet
A
B
A
Revision A