6. Connect the hitch swing cylinder hoses (collars with #2)
to the tractor's hydraulic circuit (A). Refer to
Connecting Hydraulics, page
7. Swing the disc mower completely to the left, then
completely to the right. Repeat three or four times to
charge the hitch swing circuit.
8. Swing the disc mower so that it is centered behind the
tractor.
9. Close the hitch swing lock-out valve by turning
handle (A) to the closed position (90 degree angle to
the hose).
10. Ensure tires are properly inflated.
11. Ensure the slow moving vehicle (SMV) sign, reflectors,
and lights are clean and visible at rear of disc mower.
12. Refer to
8.2 Transporting with a Tractor, page 156
transport instructions.
214713
TRANSPORTING THE DISC MOWER
5.3.3
98.
for
155
Figure 8.4: Hydraulic Connection
A
Figure 8.5: Hitch Swing Lock-Out Valve Shown
in Closed Position
A
Revision A