MacDon R116 Unloading And Assembly Instructions page 111

Figure 5.22: Hydraulic System
NOTE:
Ensure there is no contact with the rear link arm when the hitch swing cylinder extends.
2. With the cylinder disconnected from the rear arm link, using the tractor's hydraulics, extend and retract swing
cylinder (A) several times to purge any air in the cylinder.
3. Align the clevis pinholes in the cylinder clevis (B), cam
arm (C), and rear link arm (A). Install clevis pin (D) and
secure with cotter pin (E).
214713
SETTING UP THE TRACTOR
A
A
Figure 5.23: Rear Arm Link
103
C
D
E
B
Revision A