MacDon R116 Unloading And Assembly Instructions page 119

3. Straighten cutterbar door curtains (A) and remove folds
or creases (minor creases will eventually
straighten out).
4. If forming shields are installed, straighten forming shield
curtains (B) and remove folds or creases (minor
creases will eventually straighten out).
5. Ensure cutterbar door curtains and forming shield
covers hang properly and completely enclose
cutterbar area.
214713
SETTING UP THE TRACTOR
Figure 5.42: Cutterbar Door Curtains
Figure 5.43: Forming Shield Curtains
Figure 5.44: Cutterbar Door Curtains
111
A
B
Revision A