MacDon R116 Unloading And Assembly Instructions page 204

Table 10.7 Cylinder Legend
C1 - Hitch Swing Cylinder (Located Between Hitch and Transport Casting)
C3 - Transport Swing Cylinder (Located Between Carrier Frame and Transport Casting)
C5 - Slave Lift Cylinder (Located on Left Side of Carrier Frame)
C7 - Tilt Cylinder (Option) (Located Between Carrier Frame and Header)
Table 10.8 Valve Legend
V1 - Six-Way Solenoid Valve (Located Top of Hitch Mount) (Non-Energized for Transport)
V3 - Two-Way NC Directional Valve with Check (Red/Green Indicator) (Located on Hitch Alignment Mechanism)
V5.1, 5.2 - In-Line Check Valve
V7.1, 7.2, 7.3 - Shut-Off Valves for Lift and Swing Cylinder Circuit
214713
HYDRAULIC SCHEMATICS
C2 - Transport Deploy Cylinder (Located on Transport Frame)
C4 - Master Lift Cylinder (Located on Right Side of Carrier Frame)
C6 - Transport Lock Cylinder (Located on Transport Lock Mechanism)
V2 - Six-Way Mechanical Valve cam actuated (Located on Top of Transport Casting Mount)
V4 - Two-Way NC Directional Valve with Mechanical Paddle Actuator (Located on Back of Carrier Frame)
V6.1, 6.2, 6.3 - Pressure Balance Valves C1, C2, C3
196
Revision A