3. Remove four M16 hex head bolts (A), nuts, and flat
washers securing shield (B) to panel on mower (C).
4. Lift the shield (A) until pins (B) disengage from slots in
support (C) and shield on panel (D).
5. Rotate shield (A) 90 degrees and move it away from the
carrier frame.
214713
SETTING UP THE TRACTOR
Figure 5.47: Header Side View
Figure 5.48: Header Side View
Figure 5.49: Shield Rotated
113
A
A
B
C
A
B
D
C
A
Revision A