MacDon R116 Unloading And Assembly Instructions page 181

15. Remove the M20 nut (A), washers, and hex head
bolt (B) securing carrier leg (C) to the left end of the
header.
16. Remove clevis pin (A) connecting center-link (B) to
anchor (C), and separate center-link from anchor.
Reinstall pin in anchor to store.
17. Secure center-link (B) and indicator (D) to carrier frame
with a strap or wire to prevent them from contacting the
disc mower during separation.
18. Start tractor, slowly back carrier (A) off header (B), and
maneuver carrier away from header.
214713
CHANGING THE CONDITIONER
Figure 9.6: Left Side of Conditioner
Figure 9.7: Center-Link and Indicator
Figure 9.8: Carrier Removed from Header
173
A
B
D
C
A
A
B
C
B
Revision A