MacDon R116 Unloading And Assembly Instructions page 45

ASSEMBLING THE DISC MOWER (WITH OR WITHOUT THE DEALER-INSTALLED TRANSPORT)
6. Disconnect plugs P102 (A) and P301 (B) from the
transport lighting module.
7. Remove bolts (C) and remove the transport lighting
module, complete with support bracket (D).
8. Install support plate (A) and secure it with bolts (B).
9. Install bolts (C), but do NOT tighten.
10. Remove nut (A) from support (D).
11. Install bolt (B) through support (D) and support (C), and
then reinstall nut (A).
214713
Figure 3.68: Lightening Module Harness
B
C
Figure 3.69: Support Plate
Figure 3.70: Support Plate
37
A
C
B
D
A
C
A
D
B
Revision A