Converting From Field Mode To Transport (Without Road Friendly Transport ™ ) - MacDon R116 Unloading And Assembly Instructions

8.5 Converting from Field Mode to Transport (Without Road
Friendly Transport
DANGER
To avoid bodily injury or death from unexpected startup of machine, always stop engine and remove key
from ignition before leaving operator's seat for any reason.
1. Raise header.
2. Move header fully to the left side, then fully to the right side. Repeat this a couple of times.
3. Center the header.
4. Stop engine and remove key from ignition.
5. Close the steering lock-out valve by turning handle (A)
to the closed position (90 degree angle to the hose).
6. Close the lift cylinder lock-out valve by turning
handle (A) to the closed position (90 degree angle to
the hose). Repeat on opposite side.
7. Disconnect all hydraulic hoses (refer to
Connecting Hydraulics, page
electrical wiring harness.
214713
TRANSPORTING THE DISC MOWER
™ ™
)
5.3.3
98), and disconnect
159
A
Figure 8.11: Steering Lock-Out Valve
Figure 8.12: Lift Cylinder Lock-Out Valve
A
Revision A