Attaching Disc Mower To The Tractor; Attaching With Drawbar Hitch - MacDon R116 Unloading And Assembly Instructions

5.3 Attaching Disc Mower to the Tractor

Refer to the attachment procedure that applies to your tractor:
•
5.3.1 Attaching with Drawbar Hitch, page 93
•
5.3.2 Attaching with Two-Point Hitch, page 95

5.3.1 Attaching with Drawbar Hitch

CAUTION
Shut off tractor, engage parking brake, and remove key before working around hitch.
1. Remove lynch pin (A) from clevis pin (B), and remove
clevis pin from disc mower hitch.
2. Move tractor to position drawbar hitch adapter (A) under
pin (B) in disc mower hitch. Adjust height as necessary
with jack.
3. Shut down tractor and remove key from ignition.
214713
SETTING UP THE TRACTOR
Figure 5.3: Disc Mower Hitch
Figure 5.4: Disc Mower Hitch
93
B
A
B
A
Revision A