MacDon R116 Unloading And Assembly Instructions page 115

10. Remove and discard bolt (A) securing deflector (B)
to frame.
11. Remove handle (A), washers, and bolt from shield (B).
12. Swing deflector (C) under outboard shield (B) so that
handle can be installed into deflector and shield.
13. Install carriage bolt (A), washer (B), spring washer (C),
and handle (D) as shown.
14. Position deflector so handle (D) is approximately
centered in slot, and tighten handle.
214713
SETTING UP THE TRACTOR
Figure 5.32: Side Deflector Assembly
Figure 5.33: Side Deflector Assembly
Figure 5.34: Deflector Adjustment
107
B
A
A
B
C
A
B
C
D
Revision A