Installing Options; Installing Hydraulic Center-Link (Optional); Installing Tall Crop Divider (Optional) - MacDon R116 Unloading And Assembly Instructions
Pull-type disc mower
Hide thumbs
Also See for R116:
- Installation instructions manual (34 pages) ,
- Operator's manual (294 pages) ,
- Assembly instruction manual (212 pages)
Table of Contents
Advertisement
ASSEMBLING THE DISC MOWER (FACTORY-INSTALLED TRANSPORT)
4.9 Installing Options
Install the following optional kits if they were supplied with your disc mower.
4.9.1 Installing Hydraulic Center-Link (Optional)
The hydraulic center-link option is supplied in a separate shipment. Refer to the installation instructions supplied
with the kit.
4.9.2 Installing Tall Crop Divider (Optional)
The tall crop divider is supplied in a separate shipment. Refer to the installation instructions supplied with the kit.
DANGER
To avoid bodily injury or death from unexpected startup of machine, always stop engine and remove key
from ignition before leaving operator's seat for any reason.
IMPORTANT:
If disc mower will be transported on public roads in the Road Friendly Transport
dividers. Install the dividers after the machine is delivered to the customer.
214713
™
88
mode, do not install the tall crop
Revision A
Advertisement
Table of Contents
